Metal façade cladding: how to choose the right wall system

Start by deciding what the metal must do. If a profiled sheet is to protect an insulated wall, the design needs supports for the cladding and, in a ventilated façade, a continuous air path behind it. If the wall unit itself must provide insulation, start with an insulated sandwich panel and its joint details. In both systems the choice of coating, treatment of cut edges and drainage at windows and at the base of the wall affect durability. Before ordering long sheets or panels, check that the fixings can accommodate the movement expected as temperatures change.

By |2026-11-14T08:18:40+01:002026-11-14|Expert guides|Comments Off on Metal façade cladding: how to choose the right wall system

How much does T18 or T35 trapezoidal steel sheet weigh, and how do you calculate an order?

To calculate the weight of a T18 or T35 order, check the unit stated for the exact profile and steel thickness. If the manufacturer gives kilograms per linear metre of sheet, multiply by the combined lengths of all the sheets ordered. For kilograms per square metre, establish whether the figure refers to overall area or effective cover after the side lap. For unloading, obtain the gross weight of each bundle with its packaging as well as the total sheet weight. These figures help plan transport. The span the sheet can safely bridge requires a separate structural check.

By |2026-11-14T08:18:39+01:002026-11-14|Expert guides|Comments Off on How much does T18 or T35 trapezoidal steel sheet weigh, and how do you calculate an order?

Tile-effect steel or concrete roof tiles: what should you check before choosing?

Concrete tiles and tile-effect steel place different loads on the same roof and call for different delivery arrangements. Compare their weight per square metre of finished roof. For concrete tiles, check the number needed per square metre. For steel, use the cover width after allowing for the side lap. On a renovation, give these figures to the person assessing the roof frame. Check each system at the actual pitch, estimate valley cuts and establish which flashings the quotation includes. For a room in the roof, the insulation and interior lining also influence the noise occupants will hear.

By |2026-11-14T08:18:37+01:002026-11-14|Expert guides|Comments Off on Tile-effect steel or concrete roof tiles: what should you check before choosing?

How to apply for help with asbestos removal and roof replacement in Poland

When replacing an asbestos cement roof in Poland, obtain separate estimates for safe removal and for making the roof weathertight again with a new covering. Your municipality’s funding rules specify whether it pays for dismantling, transport and disposal or only for collecting waste. Before commissioning work, establish when to submit the application and when a contract can be signed. Leave the sheets undisturbed and arrange removal by a qualified specialist. As at 1 November 2026, the earlier farm roofing schemes provide no basis for assuming that every homeowner can claim the cost of a replacement roof.

By |2026-11-14T08:18:35+01:002026-11-14|Expert guides|Comments Off on How to apply for help with asbestos removal and roof replacement in Poland

How long does it take to build a house, and what can delay each stage?

To estimate a completion date, ask each trade what needs to be ready before it can start. The roofing supplier needs reliable measurements of the slopes before cutting sheets. Some floor finishes can only be laid once the substrate has reached the specified moisture level. A realistic programme brings together design, approvals, contractor availability, deliveries, curing and drying times. The roof illustrates how this works. The carpenter and roofer can agree on details and delivery windows in advance, while final cutting dimensions may have to wait until the structure is in place and can be measured.

By |2026-11-14T08:18:33+01:002026-11-14|Expert guides|Comments Off on How long does it take to build a house, and what can delay each stage?

Tile-effect steel roofing or bitumen shingles: which suits your roof?

Start with a section through the roof. Bitumen shingles need a rigid, level, continuous deck, while tile-effect steel sheets commonly rest on battens. On a new roof, that difference affects the carpentry and labour costs. When reroofing, first establish which existing layers can stay. Check the permitted pitch for each system and how the roofer will finish valleys and penetrations. Compare quotations for the same area of finished roof. To assess how quiet a bedroom under the roof will be, or how well it will cope with summer heat, consider all the layers above it.

By |2026-11-14T08:18:32+01:002026-11-14|Expert guides|Comments Off on Tile-effect steel roofing or bitumen shingles: which suits your roof?

Unauthorised building work in Poland: what can happen and when can it be regularised?

If you suspect that work on a building in Poland was unauthorised, compare what stands on the site with the approved documents. When a decision or drawing is missing from your own files, check the authority's archive. The building may have been constructed without the required procedure, or it may have been approved and altered later. The distinction affects how building supervision deals with the case. The completion date and structural condition also matter. This guide explains the facts to establish before assessing whether work can be regularised under Polish law as at 1 November 2026.

By |2026-11-14T08:18:30+01:002026-11-14|Expert guides|Comments Off on Unauthorised building work in Poland: what can happen and when can it be regularised?

What changed in Polish building law in 2026? A guide to planning roof work

If you plan to work on a roof in Poland, first describe exactly what will change. Replacing the covering, altering the structure and building a new canopy can each trigger a different procedure. The building's size, location and heritage status also matter. These facts help determine whether you need a permit, must notify the authority or have to keep a construction log. This guide covers selected changes to Poland's Building Law as at 1 November 2026. It explains how to establish which procedure applies and when you can use the transitional provisions on technical requirements for your particular project.

By |2026-11-14T08:18:28+01:002026-11-14|Expert guides|Comments Off on What changed in Polish building law in 2026? A guide to planning roof work

What are roof battens for, and how do you choose them for a roof covering?

Choose the roof covering before setting out the battens. For tile-effect steel sheets, the module length and the manufacturer's fixing positions determine where the supports go. For T18 or T35 trapezoidal steel sheet, the designer checks how far the chosen sheet thickness can span under the loads expected on this roof. Set out the first row separately: its position determines where water leaves the sheet and enters the gutter. Before fixing the battens, compare the eaves drawing with the product instructions and structural design. On the roof itself, check that the eaves line is straight and the ventilation path runs from eaves to ridge.

By |2026-11-14T08:18:27+01:002026-11-14|Expert guides|Comments Off on What are roof battens for, and how do you choose them for a roof covering?

Building work in Poland in 2026: when do you need a permit or a notification?

In Poland, the procedure for roof work depends primarily on what will change in the building. Replacing worn sheets, altering a timber frame and raising the roof are different jobs, even if a contractor describes all three as renovation. Compare the existing and proposed building and check whether Polish law requires a permit, requires formal notification or exempts the particular work from both. Planning restrictions and heritage protection also matter. This guide explains what information to gather for the designer and the authority before ordering sheets cut to length. It reflects Polish law as at 1 November 2026.

By |2026-11-14T07:47:08+01:002026-11-14|Expert guides|Comments Off on Building work in Poland in 2026: when do you need a permit or a notification?
Back to top