Which sandwich roof panel lengths are available from stock?

Stock lengths for sandwich roof panels vary from one depot to another and change with deliveries and reservations. Ask for the exact panel specification, number of pieces and length of each piece. A catalogue lists lengths a manufacturer can produce. It cannot tell you which panels you can collect today. For example, one PIR roof panel with a 40 mm core and a cover width of 1,000 mm has a catalogue length range of 2.5 to 16 m. To book transport or installers, you still need confirmation that the depot can release enough panels of the required length on the agreed date.

By |2026-11-14T06:23:50+01:002026-11-14|Expert guides|Comments Off on Which sandwich roof panel lengths are available from stock?

What does a square metre of sandwich panel really cost?

A sandwich panel can have three different costs per square metre. You can price the material at the warehouse, the usable area left after cutting, or the finished wall or roof. On a small repair, delivery and getting a crew to site can account for more than the difference between two panel prices. Check which area the supplier bills. It can differ from the area the installed panels actually cover. For panels sold by the piece, multiply length by effective cover width. For a price per linear metre, ask for the cover width before comparing it with a square-metre rate.

By |2026-11-14T06:23:48+01:002026-11-14|Expert guides|Comments Off on What does a square metre of sandwich panel really cost?

How to compare sandwich panel installation quotes

A rate per square metre for installing sandwich panels means little until you know which jobs it covers. One contractor may quote for fixing the panels alone, another for a complete envelope with seals, flashings and lifting equipment. Access, working height, panel length and the number of junctions all affect the cost. Ask how each contractor measures the area for payment. Is it the area installed, the area purchased or the gross area of the walls and roof? Agree how to measure openings and small cut sections. A vehicle doorway saves panel area but adds edges to finish. Even identical rates can produce different bills.

By |2026-11-14T06:23:46+01:002026-11-14|Expert guides|Comments Off on How to compare sandwich panel installation quotes

How do you check the fire performance of a PIR panel roof before alteration?

Before altering a PIR panel roof, identify the exact product and the assembly in which it was tested. Check three separate properties: the panel’s reaction to fire, the fire resistance of the roof assembly and its performance under external fire exposure. Then establish whether the proposed changes fall within the documented classification. PIR identifies the core material. The formulation, thickness, facings and joints also affect performance. A steel-faced sandwich roof panel and a thin-faced PIR insulation board used within a multilayer roof are different products. Each needs documentation covering the way it will actually be used.

By |2026-11-14T06:23:45+01:002026-11-14|Expert guides|Comments Off on How do you check the fire performance of a PIR panel roof before alteration?

PIR or EPS sandwich panels for a replacement roof: how do the options compare?

When replacing a roof, compare complete roof panels with two facings and a profile designed for roofing. The PIR or EPS core affects thermal performance. The choice also depends on the existing supports, design loads, fire protection requirements and conditions inside the building. In a sandwich roof panel, the facings and core act together to span between supports. Foil-faced PIR insulation boards and plain expanded polystyrene boards serve a different purpose. They need a suitable supporting roof build-up. When replacing only part of a roof, check that the new panel can form a weathertight joint with the covering that will remain.

By |2026-11-14T06:23:44+01:002026-11-14|Expert guides|Comments Off on PIR or EPS sandwich panels for a replacement roof: how do the options compare?

Can you add insulation to an existing sandwich panel roof?

An existing sandwich panel roof may be suitable for additional insulation when a cold store is converted into a heated workshop or the owner wants to reduce energy use. First establish what is already on the building. Identify the core material and panel thickness from drawings or product markings, check the supports and inspect the facings for corrosion, leaks and signs of delamination. If the core may be wet, establish how far the moisture extends before covering it. The retrofit design needs to account for the extra load, the ability of the roof to dry and the route rainwater will take at the new roof level.

By |2026-11-14T06:23:42+01:002026-11-14|Expert guides|Comments Off on Can you add insulation to an existing sandwich panel roof?

Which sandwich panel installation faults only show up once the building is in use?

The first heavy rain, a spell of frost or a thorough washdown can reveal faults that were invisible when a sandwich panel building was handed over. Start with the joints, fixings and flashings. A wall can look straight while a gap behind a trim lets in air or water. Check the supporting frame as well. Pulling a panel tight against uneven rails can dent the facing, cause ripples and prevent the panel joint from closing properly. Side lighting often makes these marks easier to see. Compare any unevenness with the specified tolerances for both the panel and the frame before attributing it to installation.

By |2026-11-14T06:23:40+01:002026-11-14|Expert guides|Comments Off on Which sandwich panel installation faults only show up once the building is in use?

How thick should a sandwich roof panel be for a heated or unheated garage?

Choose garage roof panel thickness according to how warm the space needs to be in winter and how it will be ventilated. An unheated parking garage, a garage heated occasionally for DIY and a workshop heated every day have different requirements. An insulated roof slows heat transfer. The temperature in an unheated garage still depends on the weather, heat gains and air exchange. For a heated workshop, calculate the heat losses at the intended indoor temperature and assess the whole envelope, including the walls, door and junctions. Also check that the selected roof panel suits the support spacing and local loads.

By |2026-11-14T06:23:39+01:002026-11-14|Expert guides|Comments Off on How thick should a sandwich roof panel be for a heated or unheated garage?

How do you prepare an existing building for a new sandwich panel roof?

Before replacing an existing roof covering with insulated sandwich panels, survey the parts of the building that will remain. The condition of the purlins, uneven bearing surfaces and the junction with a higher wall can all affect the scope of the work. Check the load-bearing members, their connections and their bearings on the walls for corrosion, distortion and signs of water ingress. The panels incorporate insulation and need supports suited to the chosen system. Have the new roof assessed for snow, wind and rooftop equipment as well as its own weight. Establish those requirements before stripping the old roof.

By |2026-11-14T06:23:37+01:002026-11-14|Expert guides|Comments Off on How do you prepare an existing building for a new sandwich panel roof?

How do you choose sandwich panels for a home occupied all year round?

A home needs comfortable wall surface temperatures, quiet bedrooms and enough space for pipes, cables and ducts. When choosing sandwich panels for year-round housing, consider how each panel works with the structure, the interior finishes and the way each room will be used. Metal-faced panels can carry specified loads between supports. The foundations, frame, bracing and connections still need to be designed together for the whole building. Support positions affect panel lengths and the placement of openings. Check these against the room layout early enough to plan window junctions, service penetrations and fixings for heavy fittings.

By |2026-11-14T05:37:27+01:002026-11-14|Expert guides|Comments Off on How do you choose sandwich panels for a home occupied all year round?
Back to top